|
Fits motorcycles with 7/8" handlebars. This grip is 5-3/16" long.
MULTI-PURPOSE GRIP: This dealer preferred grip fits both motorcycles with 7/8" handlebars or any ATV. Packaged with sleeves to downsize the grip's 1.00" ID to 7/8" - one set of grips satisfies the needs of any ATV owner or motorcycle owners with 7/8" handlebars.
DUAL HEAT - select either High, Low or no heat with the supplied weatherproof toggle switch.
Patented Burn-out Proof heating elements.
CUSTOM OPTIONS - all our grips come stock with a three position (high,low, off) weatherproof toggle switch. Optionally you can substitute a handlebar mounted switch, a mini toggle switch or infinitely variable heat controller.
Available with Open Ends so you can retain the end weights used on most modern sport bikes. If you have a Honda and need open-ended grips you may need stepped spacers as described: http://www.hotgrips.com/store.php?crn=201&rn=380&action=show_detail If you have any brand other than Honda and require open ended grips go to: http://www.hotgrips.com/store.php?crn=201&rn=382&action=show_detail
Technical Specifications
| Voltage: |
12 volts per pair, 6 volts per grip |
| Amps/Watts: |
approx 3.0 amps |
| Handlebar Diameter: |
7/8" |
| Outside Diameter: |
1.40 |
| Inside Diameter: |
1.00 but 2 sleeves provided to convert to 7/8" i.d. |
| External length: |
5 3/16" |
| Internal length: |
4.900 |
| Includes: |
Pair of Grips, three position toggle switch, extra wire, resistor for low heat, sleeves to downsize grip to 7/8 |
| Wiring Method: |
Series |
| Required Adhesive: |
Epoxy rated for 250 F. (not included) |
| Available Options: |
Handlebar mounted switch, mini switch, variable heat controller |
|
