About Hot Grips
Hot Grips On Line About Hot Grips
Replacement Parts Hot Grip Reviews
Hot Grip Frequently Asked Questions Hot Grip Support
Our Policies Contact Us at Hot Grips
Hot Grips On line Store
Made in the USA
Made in the USA
Since 1980
USA Shipments ONLY
No Canada Shipments
 

Model Ergo1-520-750 - kit - for 7/8" Handlebars
Model Ergo1-520-750 - kit - for 7/8" Handlebars

Fits motorcycles with 7/8" handlebars. This grip is 5-3/16" long.

MULTI-PURPOSE GRIP: This dealer preferred grip fits both motorcycles with 7/8" handlebars or any ATV. Packaged with sleeves to downsize the grip's 1.00" ID to 7/8" - one set of grips satisfies the needs of any ATV owner or motorcycle owners with 7/8" handlebars.

DUAL HEAT - select either High, Low or no heat with the supplied weatherproof toggle switch. If you want to see what the stock toggle switch looks like click on this link: http://www.hotgrips.com/store.php?crn=204&rn=163&action=show_detail

Patented Burn-out Proof heating elements.

CUSTOM OPTIONS - all our grips come stock with a three position (high,low, off) weatherproof toggle switch. Optionally you can substitute a handlebar mounted switch,mini toggle switch or infinitely variable heat controller.

Available with Open Ends so you can retain the end weights used onmost modern sport bikes.  To have us bore out your grip ends, when you select this kit there is a drop-down menu where you check the line for Open Ends.   You can also select that you want either Honda stepped spacers or flat generic spacers.  Read more for further explanation of spacers.  Spacers are used at the end of the handlebars WHEN you purchase a kit with open ends AND select a grip length that is longer than stock.  The purpose of the spacers is to eliminate any friction on the end of your throttle tube when refitting your handlebar end-weights.   If you have a Honda and need open ended grips you may need stepped spacers as described: http://www.hotgrips.com/store.php?crn=201&rn=380&action=show_detail If you have any brand other than Honda and require open ended grips go to: http://www.hotgrips.com/store.php?crn=201&rn=382&action=show_detail

Technical Specifications

Voltage:
12 volts per pair, 6 volts per grip
Amps/Watts: approx 3.0 amps
Handlebar Diameter: 7/8" motorcycle, 7/8" or 1" ATV with thumb throttle.
Outside Diameter: 1.40
Inside Diameter: 1.00 but 2 sleevesincluded to convert to 7/8" i.d.
External length: 5 3/16"
Internal length: 4.900
Includes: Pair of Grips, three position toggle switch, extra wire, resistor for low heat, 2 sleeves to downsize grips to 7/8
Wiring Method: Series
Required Adhesive: Epoxy rated for 250 F. (not included)
Available Options: Handlebar mounted switch,mini switch, variable heat controller

NOT for aluminum handlebars, as the aluminum acts like a heat sink, drawing away much of the heat. Filling aluminum handlebars with ANY form of insulation is virtually ineffective.


To find more information about each available accessory for this product visit our the Accessory Summary page.


Buy Today!
Price: $91.95

required field Grips End Style:
Accessory: Variable Heat Controller-2: (+ $41.95)
Accessory:2-part Epoxy: (+ $7.25)
Accessory: Fuse Holder with 6amp fuse : (+ $3.25)
Enter The Make (Example - Suzuki):
Enter The Model (Example - DR650):
Enter The Year (Example - 2007):
Enter The Engine Size (Example - 125cc):
required field indicates a required field.
Quantity:


 

| On-Line Store |
| About Us | Related Links | Reviews | FAQ | Support | Our Policy | Legal | Contact Us | Home |

"Hot Grips" and the associated logo are the trademark or the registered trademark of Hot Grips Manufacturing, Inc. Hot Grips® products
are protected under one or more of the following US/Canadian patents: USA: 4,471,209; 4,937,429; 4,990,753; 7,091,450; Canada: 1,299,621

Copyright 1999-2012 Hot Grips® Mfg.. All rights reserved.
Designed by NH VT Computer Services, LLC. and Hosted by GlobeInt.com, Inc.